![[Under Construction]](images/undercon.gif)
|
|
||
|
|
||
|
ALUMINUM REFLECTIVE ROOF COATING |
||
|
PRODUCT |
Ultimate’s Aluminum Asphalt Paint meets ASTM-D-2824-85 Type I specifications. This material is an asphalt cutback blended with aluminum paste. |
|
| BASIC USES: | Ultimate’s Aluminum Asphalt Paint is a non-fibred protective coating offering a reflective aluminum surface for many applications. | |
| LIMITATIONS: | DO NOT HEAT
container, DO NOT thin or exceed 900 rpm when mixing or applying or use
a roller for application. DO NOT apply over soft asphalt or coal tar
surfaces or areas that hold ponded water. DO NOT back-brush or disturb product after leafing process has begun or surface may brown. |
|
| APPLICATION: | Ultimate’s Aluminum Asphalt Paint must be applied to a surface that is dry and clean from all foreign matter. This material should be applied when the temperature is 50° F and rising. This material can be applied by brush or spray equipment (recommended airless or piston pump). The coverage rate should be 150-200 square feet per gallon. | |
| STORAGE: | Ultimate Aluminum Asphalt Paint can be used year round and the only protection required would be from weathering of the container. | |
|
|
||
| COMPOSITION: | Asphalt Mineral Spirits Aluminum Paste Desiccant |
CAS 8052-42-4 CAS 64741-41-9 CAS 7429-90-5 CAS 63231-67-4 |
This information is to assist customers in determining if this product is suitable for the proposed application, and to satisfy themselves as to suitability of the contents. Nothing herein shall constitute a warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from law or patent implied. |
||
|
|
||
